This product is available in our webstore – Shop Now
The Heliport Directional Arrow Floodlight does double duty. It illuminates the directional arrow to emphasize the yellow lights for an accurate approach and is one of the string of yellow marker lights in the arrow. One or two of these floodlights may be used in each arrow, depending upon the length.
A very bright sealed beam spotlight is mounted in the face of the fixture and an extension visor eliminates any glare. A yellow, omni-directional lens is mounted on the top covering a 35-watt incandescent lamp.
The optically designed lens has a high vertical angle and is made of aviation yellow, heat resistant glass. The lens is protected from damage by a stainless steel wire guard.
It has mounting tabs extended from the housing for surface mounting.
Case – Heavy Cast Aluminum
Lens – Heat Resistant Glass
Lamps – Par 46, 150 Watt Sealed Beam
Perimeter Lamp – 35 Watt Incandescent
Lens Guard – Stainless Steel
Power – 120 VAC, or other
Dimensions:
Height: 12 Inches
Width: 10 Inches
Length: 18 Inches
Weight: 24 pounds
Finish: Polyester Powder Coating
All customers ordering floodlighting should be aware of the following:
When installed on some types of heliports, you should follow the recommendations of the ICAO Heliport Manual 9261-AN/903. The floodlighting should be mounted outside the boundary of the TLOF (landing surface) such that the highest point on the installed light is not more than 10 inches (25 cm) above the level of the TLOF. Please be informed of these guidelines.
With the release of FAA Advisory Circular 150-5390-2B; it recommends for heliport installations in the United States, there be no equipment or structures within the boundary of the Safety Area greater than 2 inches above the level of the TLOF (landing surface) with one exception: a perimeter light no higher than 8 inches above the level of the TLOF is allowed in the Safety Area.
Have a product question? Need a quote? Please fill out our online quote request form.
Get a Quote